Certified ECA technology

Definitive protection against Legionella

Sicursan is produced on site by electrolysis and dosed directly into the water system, eliminating Legionella at the source without hazardous chemicals.

Standard active chlorine
500 ppm
Operating range
pH 6–7.5
Bactericidal efficacy
99.999%
Additional chemicals
0
  • 30+ pathogens tested under EN standards
  • ECHA Article 95 approved supplier
  • Regulated under the EU Biocidal Products Regulation
  • Partner in Scandinavia and Germany: Clean Water Supply

The problem

Legionella is everywhere in hot water

The Legionella pneumophila bacterium proliferates in hot water systems between 25 °C and 50 °C. Hospitals, hotels, residential buildings and industrial facilities are constantly at risk.

  • Rapid proliferation in pipes between 25 °C and 50 °C
  • Transmission by inhaling contaminated aerosols (showers, fountains)
  • A regulatory obligation to monitor and treat
  • High risk in healthcare, hospitality and sports facilities
Proliferation zones by temperature
  • 20–25 °C — Survival
  • 25–50 °C — Danger: optimal proliferation
  • Above 60 °C — Progressive inactivation
  • Above 70 °C — Eliminated within minutes

With Sicursan, chemical treatment is continuous, protecting the entire system.

The solution

ECA technology: advanced electrolysis

ECA produces stable hypochlorous acid directly from water and salt, without hazardous chemical additives.

  • On-site electrolysis

    The Kirkmayer generator electrolyses a saline solution, producing HOCl at 500 ppm on site. The solution is then dosed automatically into the water system.

  • HOCl, the natural disinfectant

    Hypochlorous acid is produced naturally by the immune system. It is highly bactericidal and breaks down into water and salt.

  • Continuous automatic dosing

    The system monitors and maintains the active HOCl concentration around the clock, adapting to consumption.

  • Protection of the entire system

    Sicursan is dosed continuously into the circulating water, protecting every active point of the system. As with any chemical treatment, efficacy depends on water flow — good system design remains essential to minimise dead legs.

  • Regulatory compliance

    Regulated under the EU Biocidal Products Regulation (BPR, ECHA) and approved in Spain, Poland, France, Scandinavia, Germany and the UK.

  • Sustainable

    Drastically reduces the use of traditional chemical biocides. HOCl breaks down without toxic residues.

How it works

Simple installation, continuous protection

  1. 01

    System analysis

    A technical survey maps the system, identifies the risk areas and sizes the generator correctly.

  2. 02

    Generator installation

    The Kirkmayer generator is installed on the hot water supply line in a few hours.

  3. 03

    Activation and dosing

    The system starts automatically, dosing HOCl continuously according to the set parameters.

  4. 04

    Monitoring and reporting

    Parameters are recorded continuously, with periodic reports for compliance documentation and health authority inspections.

Find out what your building needs

A free technical survey maps your hot water system and sizes the right generator.

Request a free assessment

Advantages

Why choose Sicursan

  • Bactericidal, fungicidal and virucidal

    Tested to EN 1276 (PCA AB 815) and EN 17272 (PCA AB 103) by accredited laboratories: a reduction of more than 5 log (over 99.999%) of Legionella pneumophila, and activity against 10 bacterial pathogens, Candida albicans and Modified Vaccinia Virus.

  • Lower operating costs

    No external biocides: the only consumable is salt. Maintenance is minimal and largely automatic.

  • Safety for operators and users

    No chlorine to handle. HOCl is safe even in contact with skin and mucous membranes.

  • Fits existing systems

    Installs on any existing hot water system without structural changes. Compatible with steel, copper and PVC.

  • Traceability and compliance

    The system records every operating parameter, simplifying Legionella risk-assessment reports and health inspections.

  • Scalable and modular

    From 10 L/h to over 2,000 L/h: from small buildings to large hospital and industrial complexes.

Applications

Ideal for every setting

  • Healthcare facilities

    Hospitals, clinics and nursing homes, where the risk for immunocompromised patients is highest.

  • Hotels

    Hotels and resorts with many hot water outlets and a high turnover of guests.

  • Residential buildings

    Apartment buildings and residential complexes with centralised hot water systems.

  • Industry

    Food plants and industrial facilities that need microbiologically pure water.

Certified activity

Bactericidal, fungicidal and virucidal

Sicursan has been tested by independent accredited laboratories to numerous European EN standards. The results below confirm efficacy beyond regulatory requirements against a broad spectrum of bacteria, viruses, mycobacteria and fungi.

  • 99.999%

    Bactericidal activity

    Legionella pneumophila

    Contact: 60 min

    EN 13623
  • 99.999%

    Bactericidal activity

    Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli, Enterococcus hirae

    Contact: 1 min

    EN 13727
  • 99.9999%

    Virucidal activity

    Poliovirus, Murine norovirus, Adenovirus, Vaccinia virus

    Contact: 1 min

    EN 14476
  • 99.9999%

    Mycobactericidal activity

    Mycobacterium terrae, Mycobacterium avium

    Contact: 5 min

    EN 14348
  • 99.9999%

    Fungicidal activity

    Candida albicans, Aspergillus brasiliensis

    Contact: 30 min

    EN 13697
  • 99.99%

    Bactericidal activity

    Bacillus subtilis (spores), Bacillus cereus (spores)

    Contact: 60 min

    EN 17126
See all 32 test results

Bactericidal activity

  • Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli, Enterococcus hiraeEN 13727 · 1 min99.999%
  • S. aureus ATCC 33592 (MRSA), P. aeruginosa, S. aureus, E. coli, Enterococcus hiraeEN 1276 · 5 min99.999%
  • Clavibacter sepedonicus, Pectobacterium sp., Ralstonia solanacearumEN 1276 · 1 min99.9999%
  • Legionella pneumophilaEN 1276 · 60 min99.999%
  • Legionella pneumophilaEN 13623 · 60 min99.999%
  • P. aeruginosa, S. aureus, E. coli, Enterococcus hirae, Listeria monocytogenesEN 13697 · 5 min99.9999%
  • Listeria monocytogenes, Salmonella entericaEN 13697 · 15 min99.9999%
  • Escherichia coliEN 1500 · 1 min99.99%
  • P. aeruginosa, S. aureus, E. coli, Enterococcus hiraeEN 14561 · 5 min99.999%
  • S. aureus, Streptococcus uberis, E. coliEN 1656 (0.3% bovine albumin) · 1 min99.99%
  • S. aureus, Streptococcus uberis, Enterococcus hiraeEN 1656 (1.0% skimmed milk) · 5 min99.999%
  • S. aureus, P. aeruginosa, Enterococcus hiraeEN 16615 · 1 min99.9999%
  • Bacillus subtilis (spores), Bacillus cereus (spores)EN 17126 · 60 min99.99%
  • S. aureus, P. aeruginosa, E. hirae, E. coli, Acinetobacter baumannii, Proteus hauseri, Salmonella Typhimurium, Salmonella Enteritidis, L. monocytogenes, Legionella pneumophila, Clostridioides difficile (vegetative forms)EN 17272 (fogging) · 60 min99.0–99.9999%
  • Staphylococcus aureusEN 17272 (fogging) · 3 min99.0%

Virucidal activity

  • Poliovirus, Murine norovirus, Adenovirus, Vaccinia virusEN 14476 · 1 min99.9999%
  • African swine fever virusZCHS/PB-83 (National Veterinary Research Institute, Poland) · 30 min99.99%
  • Bovine enterovirusEN 14657 · 30 min99.99%
  • Avian influenza A (H1N1)EN 14657 · 30 min99.999%
  • Poliovirus, Murine norovirus, Adenovirus, Vaccinia virus, Human coronavirus, Modified Vaccinia Virus AnkaraEN 17272 (fogging) · 60 min99.999%
  • Modified Vaccinia Virus AnkaraEN 17272 (fogging) · 3 min99.0%

Mycobactericidal activity

  • Mycobacterium terrae, Mycobacterium aviumEN 14348 · 5 min99.9999%
  • Mycobacterium terrae, Mycobacterium aviumEN 1727 (fogging) · 60 min99.999%

Fungicidal activity

  • Candida albicans, Aspergillus brasiliensisEN 13697 · 30 min99.9999%
  • Candida albicans, Aspergillus brasiliensisEN 13624 · 5 min99.99%
  • Candida albicans, Aspergillus brasiliensisEN 13624 · 30 min99.99%
  • Candida albicans, Aspergillus brasiliensisEN 1650 · 5 min99.99%
  • Candida albicans, Aspergillus brasiliensisEN 1650 · 30 min99.99%
  • Candida albicans, Aspergillus brasiliensisEN 14562 · 15 min99.99%
  • Candida albicans, Aspergillus brasiliensisEN 14562 · 30 min99.99%
  • Candida albicansEN 1657 · 1 min99.99%
  • Candida albicans, Aspergillus brasiliensisEN 17272 (fogging) · 60 min99.999%

Fogging tests (EN 17272, EN 1727) were performed in a closed 30 m³ chamber, at a dosage of 11.5 ml/m³ with 60 minutes' contact time. Kirkmayer is approved by ECHA as an active substance supplier — active chlorine released from hypochlorous acid — under Article 95 of Regulation (EU) 528/2012.

Want these results in your hot water system?

Tell us about your building — a specialist replies within one business day.

Request a free assessment

Real installations

Sicursan in the field

Systems installed and running in real facilities. Photos courtesy of our exclusive distributor for Scandinavia and Germany, Clean Water Supply (Denmark).

  • Kirkmayer Sicursan generator installed in a plant room
  • A technician from our official partner Clean Water Supply (Denmark) during installation and hydraulic connection
  • A complete system integrated into an existing hot water network

Free assessment

Ready to protect your system?

Tell us about your building and a Kirkmayer specialist will get back to you within one business day with a proposal sized for your hot water system.

  • Technical survey and generator sizing
  • A reply within one business day
  • No commitment
Type of facility (optional)

We use your details only to reply to your enquiry — see our Privacy policy.